The Category
Part Number
432-615.
The Description
A standard self - centering 3 - jaw chuck with the key.
It has a maximum ⅜ "(9.5 mm) opening and is connected to the Helixa torque sensor via an adaptor with female ⅜" square hole.
2 secure a variety of test specimens for torque applications of 1.5-10 N.m.
It for use only with 3 and 6 N.m sensors due to the risk of overloading the lower - capacity sensors when tightening the chuck.
It has a maximum ⅜ "(9.5 mm) opening and is connected to the Helixa torque sensor via an adaptor with female ⅜" square hole.
2 secure a variety of test specimens for torque applications of 1.5-10 N.m.
It for use only with 3 and 6 N.m sensors due to the risk of overloading the lower - capacity sensors when tightening the chuck.
Images
Datasheet
3 - jaw and 4 - jaw Torque Chucks, QC fitting DS - 1130-02 - L00The Related Parts
Fittings
Weight
255 g
Talk to the experts
Have some doubts about this parts?Immediately contact one of our technical sales engineer and talk...