COVID - 19 tape and label adhesive peel strength

solution

Software control of the peel strength tester (for 90 ° and 180 ° peel adhesive force test)
Automatic and customizable stripping adhesion figure

benefits

Easy to training multi-function equipment
Intuitive software to calculate and draw the peel strength
A wide range of report to record results for review

demand

After Covid - 19 lock, release to the enterprise has a clear criterion of ensure the safety of employees and customers.These measures include wall sign, to encourage people to follow the health guidelines, until the floor of the special adhesive tape, in order to help enforce the rules of the far away from the society.

To successfully persistently used on the surface, they are dependent on the humble self adhesive viscosity.

Safety strip, for example, can be rolled into a roll, and easy to cut into the required length.Adhesive backing can be easily installed and no damage.And the most common type of pressure sensitive adhesive tape (PSA), composite materials by solid backing layer (such as PVC, vinyl) and soft adhesive layer.Adhesive is usually used in the thermoplastic - heat will soften, brittle as it cools.

Floor tape may scratch resistance and fracture, but there may be a tear, peeling or adhesion in some shortcomings on the surface, thus causing the danger of tripping.Test tape and signs of adhesion strength characteristics is an important factor in quality control assessment.

solution

ISO 29862, ISO 29862, 5001 and ASTM AFERA D3330 test standard were described to determine the adhesive tape stripping method of adhesive performance.They make the tape between the manufacturers and users can assess the single roll of tape, or between different volume production batch uniformity between the adhesive.

Hold the tape samples under standard conditions of temperature and humidity, and then cut into the specified width and length.Then by using the fixed weight roll will tape evenly applied to the test board.This ensures that the minimum of the changes in the specimen.

Then put the tape fixed in the detachment of special fixture, the fixture is fixed on a tensile testing machine.Tensile tester at a constant elongation (CRE) mobile, so that the adhesive and the adhesive tape separated gradually, while the tester software calculation adhesion strength and stripping adhesion properties.Stripping Angle and the Angle of the test plate was established by the method of testing.

Method 1 - to spin out the tape from stainless steel plate, 90 ° and 180 °

Method 2 - to spin out the tape from its backing to 90 ° and 180 °

Methods 3 - double-sided tape and transfer tape of 90 ° and 180 ° peel adhesive force

Methods 4 - to spin out the tape from the lining, 90 ° and 180 °

Test equipment

BOB体育最新下载安装Mecmesin stripping tester is very suitable for performing these tests.Can easily configure them to fit into the corresponding clamp peeled, even for unskilled operators, the software is easy to use.Standard templates provided include stripping adhesion to test report, can also according to your exact requirements to custom.