Golf deflection tests

The solution

The software control compression test bed
Compression fixtures and golf

benefits

The same machine two ball test
For the new test program software control to increase the flexibility

requirements

Golf manufacturers have factories in the United States and India.The test requires measuring the hardness of different levels of golf, to maintain its consistency in the manufacturing process and provide two factories to provide the same quality products.Manufacturers hope that simulated golf club as much as possible with the ball fast contact, therefore chose 20 "/ min speed.

The solution

BOB体育最新下载安装Mecmesin provides a MultiTest 1 - I, can test 1000 N force, a S beam weighing sensors and two flat platen.In order to obtain reliable results accuracy, the golf ball is placed in a compressed plate, maximize the surface contact.In order to test, reduce the pressure plate at a speed of 20 inches per minute.Once the board at the top of the initial contact with golf, will record the "contact".Starting from now, system from scratch.Clamp continue to exert maximum 200 LBF force, and pause for 2 seconds.The two measurements.

Golf at 200 LBF deflection
Determine the deflection of golf, after 2 seconds to determine the degree of relaxation

As a result of the material hardness, important is the compensation movement of the weighing sensor system.MultiTest - I test system with "deviation compensation system integration, the system will be automatically applied to maintain the accuracy of the results.MultiTest - I system controlled by PC, thus can be graphically display test data.Stack trace tests, therefore, can be easily correlation between recognition test on the screen, the operator can use the other options for statistical analysis.

This test provides specific instructions from our product performance for the company, and enable them to build standards and benchmarks for future product evaluation.