The Category
Part Number
432-617.
The Description
A standard self - centering 3 - jaw chuck with the key.
It has a maximum 1/2 level "(12.7 mm) opening and is connected to the Helixa torque sensor via an adaptor with female ⅜" square hole.
2 secure a variety of test specimens for torque applications of 1.5-10 N.m.
It for use only with 3 and 6 N.m sensors due to the risk of overloading the lower - capacity sensors when tightening the chuck.
It has a maximum 1/2 level "(12.7 mm) opening and is connected to the Helixa torque sensor via an adaptor with female ⅜" square hole.
2 secure a variety of test specimens for torque applications of 1.5-10 N.m.
It for use only with 3 and 6 N.m sensors due to the risk of overloading the lower - capacity sensors when tightening the chuck.
Images
The Related Parts
Fittings
Talk to the experts
Have some doubts about this parts?Immediately contact one of our technical sales engineer and talk...