Shear in tension

Switch to solutions by

Industry Product Tested Test Type

Shear testing in tension (also known as 'lap shear') is commonly used to test adhesives and involves the pulling apart of a material specimen by applying tensile force from opposite sides in a parallel plane. In this way, the material is stressed in a sliding motion. Lap shear testing is typically used where an adhesive bond joins flat surfaces.

The required surfaces may be single, double or multiple. In the case of a single lap shear test, one part is pulled across another at a constant rate. Alternatively, it can be double-shear, where a bonded section is pulled out from between the sections on either side.

Lap joint strength is a function of the materials used, including their absorbency to adhesive, relative elastic properties, and the cohesive properties of the bonding material. The majority of standard test methods are usually tensile, but materials like wood are often tested under compression.

Being able to analyse test result characteristics in fine detail is important where shear failure may occur in either the bonding, the bonded layers or both (adhesion and cohesion). Results for lap shear tests are usually expressed as the applied load divided by the area of the bonded overlap (MPa or N/mm²).

Standards

Featured or equivalent test standards for Mecmesin solutions in this section

BS EN 310

Wood-based panels. Determination of modulus of elasticity in bending and of bending strength

BS EN ISO 314-1

Plywood. Bonding quality. Part 1: Test methods

Test types

Further or specific test types in this section

double lap shear

Lap shear testing is used where an adhesive bond joins flat surfaces.

single lap shear

Lap shear testing is used where an adhesive bond joins flat surfaces.

Term Video

< p > < a href = " https://videos.sproutvideo.com/embed/189ddab9111ee3c090/66763984e58e1182?bigPlayButton=false&playerTheme=light&playerColor=2f3437&autoPlay=true" class="sproutvideo-lightbox" data-width="640" data-height="640">

Diamond-edged grinding and cutting tool break strength

Case study

Diamond cutting tool tooth break resistance test

Lap shear testing of plywood

Case study

BS EN 310

Lap shear testing of plywood specimens to EN314-1

Diamond-edged grinding and cutting tool break strength

Case study

Diamond grinding tool tooth break resistance test systems

Lap shear testing of plywood

Case study

Diamond-edged grinding and cutting tool break strength

Lap shear testing of plywood

Online demonstrations and training available from Mecmesin technical sales engineers

Online test equipment and training demos

As more people are working from home to reduce non-essential travel, our technical sales engineers can provide online equipment demos or training sessions via web-based video calls.

If possible, send in your own samples and our sales team will be able to present your own products being tested.

Get in touch tobob sports app 下载 and tobob sports app 下载 or training session.

map

Standards

Test types

Term Video

Online test equipment and training demos

Global distribution